MINI (DIP40) Shield

The MINI (DIP40) Shield is designed to install MikroElektronika™ MINI modules to mikroBUS™ slot or connect mikroBUS™ modules (such as MikroElekronika's Click®) to MikroElektronika MINI modules.

This shield can be used with the following SoMs:

• MINI-M4™ For MSP432 (MSP432P401RIRGC microcontroller)
• MINI-M4™ For Stellaris (LX4F230H5QR microcontroller)
• MINI-M0™ For STM32 (STM32F051R8 microcontroller)
• MINI-M4™ For STM32 (STM32F415RG microcontroller)
• MINI-M4™ For Tiva ™ C Series (TM4C123GH6PM microcontroller)
• MINI-32™ For PIC32MZ (PIC32MZ microcontroller)
• MINI-M4™ For Kinetis (MK64FN1M0VDC12 microcontroller)

with all software and services from specified companies.

Almost all signals not used by mikroBUS™ from the installed MikroElektronika MINI are output to the AUX connectors.

The I²C interface is most often used in the design of devices and instruments based on this module. For this, the module has I²C connector through which you can connect external devices and sensors.

The MINI (DIP40) Shield contains the voltage regulator AMS1117-3.3. On the bottom-side there is a jumper defining the 3V3 source on the mikroBUS™ (from the installed to MikroElektronika MINI module or from AMS1117-3.3). By default - from the installed module.

Optionally, a BME280 is installed on the bottom-side of the module (7-bit address on I²C = 111011x). The address for BME280 is selected with jumpers on the bottom-side. The default address should be 1110111.

The MINI (DIP40) Shield module size 50.8 x 25.4 mm.

The main areas of application of the module:

• Industry and transport automation
• Data acquisition systems (DAS) and PLC
• Scientific and medical equipment
• Digital Signal Processing (DSP)
• Heating, Ventilation, & Air Conditioning (HVAC)
• Motor control
• Smart home

With MINI (DIP40) Shield, it is easy to use MikroElektronika MINI modules to control the following I / O modules:

• IoThing 2RO+2AI
• IoThing 2RO+2DI
• mikroBUS A+ Adapter